All in One · 20 HP · 15 kW
MNA-15LG20 HP all-in-one air compressor | Masia Compressors
20 HP All in One air compressor: rotary screw compressor with IE4 permanent magnet motor, variable speed drive, dryer and tank integrated in a single compact unit.
20 HPPower · 15 kW
32–84 cfmFlow rate
IE4Permanent magnet motor
3 en 1Compressor, dryer and tank
Three unitsin one
Rotary screw compressor
High-efficiency compressor unit with IE4 permanent magnet motor and variable speed drive.
Integrated dryer
Refrigerated dryer that delivers dry air ready for your process.
Air tank
Air reserve that stabilizes pressure and reduces compressor cycling.
Internal designof the MNA-15LG
The components that make this All in One an efficient, easy-to-maintain unit.
- New compressor unitImproved rotor profiles, developed in Japan and designed for many years of operation.
- IE4 permanent magnet motorIE4 standard efficiency, oil-cooled, with variable speed (VSD) and IP65 protection.
- Heavy-duty intake filterFilters 99.9 % of particles larger than 0.3 microns, with a differential gauge and a 2,000-hour service interval.
- VSD fanDrive-controlled, compact, low-noise, with high cooling capacity and low power consumption.
- Oil cooler and aftercoolerEasy access for maintenance and a surface with anti-corrosion paint.
- Flow Vector inverterWide-voltage design, integrated DC reactor and independent cooling air duct.
- PLC with IT 7000 touchscreenController designed for permanent magnet motors, with a rugged enclosure for trouble-free operation.
- Intake valveOptimizes air intake to the compressor unit; aluminum design and vacuum of up to 700 mmHg with low power consumption.
Specificationstechnical
Data from the Masia Compressors technical data sheet.
| Parameter | Value |
|---|---|
| Power | 15 kW (20 HP) |
| Flow rate (FAD) | 32–84 cfm |
| Working pressure | 100–236 psi · 7–16 bar |
| Outlet connection | ¾" NPT |
| Dimensiones (L × A × H) | 1,48 × 0,80 × 1,88 m |
| Weight | 410 kg |
| Motor efficiency | 95 % |
| Fan | 0,38 kW |
| Cooling air | 6.000 m³/h |
| Lubricant quantity | 15 L |
| Noise level | 65 ± 3 dB |
| Engine | Permanent magnet (PM), oil-cooled · IE4 |
| Motor protection | IP65 · class F insulation |
| Starting method | Variable speed drive (VSD) |
| Service factor | 1,2 |
| Compression stages | 1 |
| Maximum ambient temperature | 46 °C |
| Maximum relative humidity | 80 % |
| Lubricant grade | ISO 46 |
| Voltaje (modificable) | 220 / 230 / 440 / 460 / 480 V · 60 Hz · 3 fases |
| Voltage range | ±10 % |
| Drive | Direct 1:1 |
| Protections | High temperature, high voltage, overcurrent, phase loss and unstable voltage |
Specifications are taken from the Masia Compressors technical data sheet; values may vary depending on configuration. Check with our team.
Main componentsand their origin
| Component | Origin |
|---|---|
| Compressor unit | Japan |
| Magnet motor | Japan |
| Bearings | Sweden |
| Intake valve | Austria |
| Pressure sensor | Denmark |
| Variable frequency drive | Germany |
| Controller | Germany |
| Filters and lubricant | Germany |
| Solenoid valve | Italy |
MNA-15LG technical data sheet
Download the PDF with all specifications.
